Alkaline Battery Holder - The Explorer Alkaline Battery Holder holds 8 x AA Alkaline batteries works for both the Explorer II and the Quattro. Useful as a spare battery pack; keep it in the glove box so if your rechargeable batteries get low, you can continue detecting all day long.

NiMH Battery Pack - Suitable for all Explorer and Quattro detectors. The NiMH battery pack provides you with a rechargeable battery system that gives you better power and longer battery life. 1800 mAH

NiMH 110V Battery Charger - This 110V NiMH battery charger is suitable for the Minelab NiMH rechargeable battery packs for the Explorer and Quattro. Allows you to charge your Minelab NiMH rechargeable battery pack from your 110V home AC plug.

NiMH 12V Battery Pack Car Charger - This 12 V car charger is suitable for Explorer and Quattro rechargeable battery packs. Charge your detector battery from the 12V adapter plug in your car, any time you are away from an AC plug.

Explorer Protective Hood - The hood provides protection from the elements, so you can go detecting in all weather conditions! Elastic, snug fit keeps out all of the elements. Fits Explorer and Quattro.

Minelab Carry Bag - This newly redesigned carry bag is suitable for all Minelab detectors. This tough padded bag is ideal for storing and transporting your Minelab detector. Extra width at the front of the bag. List Price $59.95

Explorer 8 Inch FBS Search Coil - The 8 inch coil is great for detecting areas of high target content. If two or more targets are located under a coil at once, the discrimination can sometimes be effected. By using a smaller, more precise coil like the 8" coil, you are able to pick up individual targets and accurate identification of each one is improved. The 8 inch coil is very lightweight and ideal for searching around hard-to-get-at locations. Lower shaft and scuff cover included. Coils fits Explorer II, SE, XS and Quattro. Shaft fits only Explorer II, SE and Quattro

10 Inch FBS Slimline Search Coil for Minelab Explorer (Works on all Explorers including SE, II, XS and Quattro) - This is the latest version of the fully submersible 10" Coil is designed for use with all Minelab Explorer models and the Quattro. These coils are lightweight with a slimline profile. Improves the depth over smaller coils.

10"Search Coil for Minelab Explorer or Quattro -  List Price: 269.95; Sale Price: $219.97

Metal Detector Questions Ph: 1-865-609-8043
Orders Only Toll Free 1-866-609-8043
info@detectordepot.com

Explorer Lower Shaft Assembly - Lower shaft assembly for the Explorer II and SE. Includes coil mounting hardware.

Excalibur 2 Alkaline Battery Pod - This battery pack holds 8 x AA alkaline batteries for the Excalibur 800 or 1000. This battery pack is ideal to have in the car as a spare in case your rechargeable NiCAD pack runs out of power. Batteries Not Included!

Excalibur 2 NiMH Rechargeable Battery Pod - The NiMH battery pack is suitable for both the Excalibur 2 8" and 10" detectors. Fully sealed and waterproof to 250ft depth, this battery provides a cost effective way of searching for hours.

Excalibur Hip Mount Kit - The Excalibur Hip Mount Kit can be used with either the 800 and 1000 models, or Excalibur 2. This kit allows the control box to be removed from the stem and hip mounted around the waist. Very comfortable and ideal for swimming or wading.

Excalibur 800/1000 NiCad Rechargeable Battery Pod - The NiCad battery pack is suitable for both the Excalibur 800 and 1000 detectors. Fully sealed and waterproof to 250ft depth, this battery provides a cost effective way of searching for hours.

Excalibur 110V NiCad Battery Charger - The Excalibur NiCad Battery Charger for the 110V Excalibur NiCad battery pod. For all Excalibur's except Excalibur 2. (Note this does not include the adapter which must be purchased separately - see next item below!)

Excalibur 110V NiCad Battery Charger Adapter - The Excalibur NiCad Battery Charger for the 110V Excalibur NiCad battery pod. For all Excalibur's except Excalibur 2. Required for connecting charger to battery pod. (Note - Charger cannot be used without one of these!)

Excalibur Hip Mount Kit - The Excalibur Hip Mount Kit can be used with either the 800 and 1000 models, or Excalibur 2. This kit allows the control box to be removed from the stem and hip mounted around the waist. Very comfortable and ideal for swimming or wading.

Minelab Carry Bag - This newly redesigned carry bag is suitable for all Minelab detectors. This tough padded bag is ideal for storing and transporting your Minelab detector. Extra width at the front of the bag. List Price $59.95

Minelab Recalibrated Digital Meter for the Sovereign GT - This digital meter converts the signal from the coil into a digital number that is displayed on the screen. Allows you to id the target visually and audibly before you dig it. List Price $219.95

Minelab Sovereign 8 Inch Slimline Tornado Coil - Designed for the Minelab Sovereign metal detectors this 8'' coil is fully submersible. With a PCB incorporated into it, the BBS Tornado 800 coil is extremely stable and provides excellent sensitivity.

Note: This coil fits the Sovereign GT as well as all previous models of Sovereign.

Minelab Hip Mount Bag - Suited to the Sovereign Elite, Sovereign GT, Eureka Gold and Musketeer Advantage. This tough, padded hipmount bag allows you to remove the control box from the shaft of the detector and wear it around your waist or over the shoulder, making the detector lighter and more comfortable to use.

Minelab X-Terra 5" x 10" 18.75 kHz Search Coil for X-Terra 50/70 - This is the optional DD 18.75 kHz Search Coil for the X-Terra. Complete with coil scuff cover.