Minelab Metal Detectors

Tesoro Metal Detectors

Fisher Metal Detectors

Garrett Metal Detectors

Industrial / Utility Locators and Metal Detectors 

Sun Ray Probes & Coils

Coiltek Search Coils

Security Metal Detectors

Gray Ghost Headphones

The Vibra-Probe 570 Pinpointer metal detector is a miniature version of a primary detector. It communicates through vibration, incorporates Pulse Induction (PI) technology, is waterproof to a depth of 30 feet and comes with the belt mountable holster. The Vibra-Probe 570 is fully automatic. The self-calibrating microprocessor controlled circuitry requires no adjustments and utilizes automatic on and off. The modern electronics and simple to use design makes locating elusive targets easy in any environment including grass, mud, dirt, sand, black sand, or even in fresh or salt water.

Vibra-Probe 570 Features:

• Communicates with vibration - The Vibra-Probe 570 signals with pulses of vibration when a target is located. It replaces the need for buzzers that can be difficult to hear, especially when wearing headphones from a primary detector.

• Pulse Induction (PI) - This technology allows hunting at the beach in salt water or in any type of soil, including black sand.

• Detection depth stability - New advanced circuitry maintains the unit’s detection distance throughout the life of the battery.

• True target direction - The Vibra-Probe 570 detects at the tip only, not along the shaft, enabling precision target pinpointing.

• Target distancing - The pulses of vibration will continue to increase in quantity as the probe tip gets closer to the target.

• Automatic tuning - The state of the art microprocessor controlled design requires no adjustments of any kind.

• Automatic On/Off - No push button switches. The Vibra- Probe 570 automatically turns on when pointed upward and automatically turns off one minute after last pulse.

• Waterproof - Unique sealed design allows the Vibra-Probe to be used in the rain, mud, or under water to a depth of 30 feet.

• Low battery indicator - Built in low battery sensor alerts you when the battery is low and needs replacing.

• Easy battery installation - The standard nine-volt battery is quickly changed without tools. Simply rotate the rear knob and pull out the compression seal to access the battery compartment.

• Solid construction - The Vibra-Probe’s rugged sealed construction and stainless steel hardware are built to last.

• Holster - Includes belt mountable holster for easy carrying.

Vibra-Probe 570 ™

Purchase Vibra-Probe 570 - $129.95 (Price Includes Shipping in Continental US)

Vibra-Probe 570 - Metal Detector - Pinpointer Probe

Click on Image to Enlarge

Detection Type • Pulse Induction

Search Mode • All metal

Overall Length • 14 inches

Weight • 0.5 lbs.

Power • Standard 9 volt battery

Warranty • 1 year

Battery • Included

Made in the USA

Vibra-Probe 570 -

Suggested Retail: $149.95

Our Price: $129.95

Pocket UniProbe is our new high-powered pulse inductance probe that can be switched on or off during hunting and retrieval with your metal detector. Or, with an optional PI searchcoil and rods, it can be turned into a complete PI metal detector! Pocket Uniprobe contains today's most innovative Pulse Inductance electronics. The Pocket UniProbe performs in all ground mineral conditions, both salt and fresh water beaches too with up to 5-6" depth on coins in the retrieval hole. Pocket UniProbe is a true universal application probe/ metal detector and it will open up a whole new world of accurate retrieval for you. Isn't about time you stopped scratching your valuable coins, relics and jewelry by not being able to pinpoint accurately with large detector searchcoils? 

Technical Specifications:

• Operating Search Frequency: Pulse Induction.
• Searchcoil: 8" x 5/8" diameter probe.
• Probe Depth: Up to 5-6" deep on coins in the hole.
• External Speaker: Speaker designed for maximum sensitivity efficiency, durability and signal quality.
• Auxiliary Headphone Jack: 1/8" diameter (use ordinary 1/8" to 1/4" conversion plug)
• Audio Frequency: Pulse VCO
• Controls: Continuous adjust Threshold and Pulse Frequency.
• Switches: Probe "On/Off"
• Search Mode: Threshold search, slow-motion.
• Operating environments: 8" Probe is waterproof for land, salt & fresh water beach use.
• Rods: Optional for conversion to Pulse detector
• Searchcoils: Optional DetectorPro 8" or 11" PI
• Battery: (1) 9-Volt Alkaline battery (supplied).
• Battery Life: Dependent on the on/off cycling during use, rated currently up to 12 hours (alkaline) continuous "on" use.
• Applications: Pinpointing for jewelry, relic, and coin hunting.
• Warranty: Two Years.
• NOTE: Specifications and features subject to change without notice

Pocket UniProbe Full View

 
Pocket UniProbe Side View

 
Pocket UniProbe

Optional Search Coil for UniProbe

UniProbe Coil and Rod Set - An option that allows you to turn your UniProbe into a Fully Functional Pulse Metal Detector
List Price: $350 - Our Price: $315.00
Choose 8" or 11" Coil - Same Price!
Free Shipping (Continental US Only)

UniProbe Coil - Coil Only - An option when used with the UniProbe Rod Set allows you to turn your UniProbe into a Fully Functional Pulse Metal Detector
List Price: $270 - Our Price: $243.00
Choose 8" or 11" Coil - Same Price!
Free Shipping (Continental US Only)

You are looking at a value-added industry first from DetectorPro! The first compact

Technical Specifications:

• Operating Search Frequency: Pulse Induction.
• Searchcoil: 8" x 5/8" diameter probe.
• Probe Depth: Up to 5-6" deep on coins in the hole.
• Headphone Transducers: Speakers designed for maximum sensitivity efficiency, durability and signal quality.
• Audio Frequency: Pulse VCO
• Headphone Earcups: Heavy-duty polymer full ear surround; extra comfortable soft cushions, ambient noise blocking up to 23 decibels.
• Headphone Frame: Adjustable padded headband, no screws, no wire frame, no rust, compact carry foldable design.
• Controls: Full range "stay put" volume with segmented "click" positioning; continuous adjust Threshold and Frequency.
• Switches: All Detector Compatibility; Probe "On/Off"
• Search Mode: Threshold search, slow-motion.
• Operating environments: 8" Probe is waterproof for land, salt & fresh water beach use; Headphones are not waterproof.
• Cables: 1/4" heavy-duty removable coil cords for probe and headphone with high-quality connectors.
• Rods: Optional for conversion to Pulse detector
• Searchcoils: Optional DetectorPro 8" or 11" PI
• Breakdown: Compact fold and carry, removable cords with high-quality connectors.
• Battery: (1) 9-Volt Alkaline battery (supplied).
• Battery Life: Dependent on the on/off cycling during use, rated currently up to 12 hours (alkaline) continuous "on" use.
• Applications: Jewelry, relic, and coin hunting.
• Warranty: Two Years.
• NOTE: Specifications and features subject to change without notice.

Uniprobe With Probe Assembled

 
UniProbe Side View

 
Headphone Plug - Allows Use of UniProbe as Headphones - No Need to Disconnect Probe

Optional Search Coil for UniProbe

UniProbe Coil and Rod Set - An option that allows you to turn your UniProbe into a Fully Functional Pulse Metal Detector
List Price: $350 - Our Price: $315.00
Choose 8" or 11" Coil - Same Price!
Free Shipping (Continental US Only)

UniProbe Coil - Coil Only - An option when used with the UniProbe Rod Set allows you to turn your UniProbe into a Fully Functional Pulse Metal Detector
List Price: $270 - Our Price: $243.00
Choose 8" or 11" Coil - Same Price!
Free Shipping (Continental US Only)

Sun Ray X-1 Probe for the Minelab Explorer:  The Best Probe Available!

• Accurate "Bullseye" pinpointing on coin size targets up to 3" deep in discriminate mode - 2 1/2" in pinpoint mode!

• Light weight, waterproof/submersible 1" X 9" probe. Comes with  30" straight cable with strain relief, and mounts nicely along the Explorer's battery compartment.

• Very compact, ultra light switch box mounted on bottom of upper shaft makes for easy switching from coil to probe. Makes coil changes super fast as coil cable will no longer be inserted into upper shaft!

• X-1 gives operator ALL of the same functions as stock coil including accurate visual and audible target ID in both Smartfind & Digital mode, non-motion pinpoint, etc.

• Accurate approximate depth indications from tip of probe to target can be achieved through visual observation of the Explorer's depth gauge (although the scale will be different). Scale is explained in X-1 instructions. Accuracy on coin size targets only.

• No external buzzers or lights are needed as all targets are heard clearly through your detector headphones!

• FULL 12 MONTH WARRANTY!!

Free Ground Shipping

 Sun Ray X-1 Target Probe for Explorer SE - Sold on New Black SE Shaft - Probe is Black Too - (Picture shows white Probe!)

Please Specify Left Hand, or Right Hand Swing When Ordering!

Sun Ray X-1 Target Probe for Explorer SE
Mounted on Black Minelab SE Shaft
Your Price: $209.95
Free Shipping (Continental US only)
 

Please Specify Left Hand, or Right Hand Swing When Ordering!

Sun Ray X-1 Target Probe for Explorer II
Mounted On White Minelab Explorer II Shaft
Your Price: $209.95
Free Shipping (Continental US only)
 

• Accurate "Bullseye" pinpointing on coin size targets up to 3" deep in all metal mode! 1 1/2" - 2" accurate tone ID in discriminate mode! (NOTE: Greater depth on larger than coin size targets)

• Accurate visual ID when used with digital meter!

• Uses the Elite / GT BBS circuitry to cancel ground effects and reject most hot rocks!

• No buzzers or lights necessary. All target responses come directly through your headphones! Makes hand held probes obsolete!

• No extra batteries required! 

• S-1 probe is 9" long and 1" in diameter and is submersible.

• S-1 switch box slides onto the meter mounting bracket and the meter slides onto the top of the S-1 switch box allowing you to see the Minelab meter display easier and allows switching from coil to probe and back with the flip of your thumb! 

• Probe is detachable from S-1 switch box for direct insertion to Elite control housing for stand alone detecting/pinpointing!

• Includes S-1  Probe Clip Attachment for attaching S-1 probe along side arm rest when not in use!  

• Ultra Light Weight! The S-1 is small and lightweight. Probe w/cable=7 oz / S-1 switch box=5 oz / overall weight including 2 probe clips=13 oz!

• S-1 switch box comes with a short standard length cable and connects directly into your Minelab or Sun Ray meter.

• Optional 12" switch box extension cable available if mounting your Elite / GT control housing under the arm rest w/o a meter. Optional 50" switch box extension cable available if hip/chest mounting the control housing w/o a meter.

• FULL 12 MONTH WARRANTY!!

Free Ground Shipping

Sun Ray S-1 Target Probe for Minelab Sovereign Elite / GT
Your Price: $179.95
Free Shipping (Continental US only)
 

• Fully compatible with all Garrett GTI models (including the 1500, 2000, 2500)! The GI-1 is precision built to ensure peak performance.
  
• Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on detector used, settings, ground and moisture conditions!
  
• Light weight, waterproof/submersible 9" X 1" diameter probe mounts on top of upper shaft for easy access. GI-1 probe and cable weigh approx. 6 oz. GI-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - approx. 11 oz total!
• While the GI-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as Garrett.)
• Installation requires no tools or modifications to the detector.
• The GI-1 incorporates all of the same functions as the stock coil including visual and audible target ID along with identical pinpoint functions! (The GI-1 probe is non-imaging and depth reading will be off due to the probe's diameter, which is normal.)
• High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a very flexible heavy duty custom 30" straight cable with strain relief for "tangle free" operation.
• Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
• Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
• GI-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
• No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
• No extra batteries required as the GI-1 utilizes the detectors power source.
• Complete installation & operation instructions included.

  • FULL 12 MONTH WARRANTY!!

Free Ground Shipping

Sun Ray Invader GI-1 Probe for Garrett GTI
Your Price: $179.95
Free Shipping (Continental US only)
 

• Fully compatible with the Garrett ACE 150 & 250 models and with the flip of a switch is compatible with the GTP 1350 and selected GTAX models specifically the GTAX 550, 750 & 1250. (NOTE: Early GTAX models including the GTAX 350, 400, 500 & 1000 are not compatible due to a different "center pin" connector used. If you need a YF-1 for one of these early models call us direct at (319) 636-2244 and ask for Ralph for information on YF-1 custom connector options. The YF-1 is precision built to ensure peak performance.
• Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on detector used, settings, ground and moisture conditions!
• New compact, Light weight, waterproof/submersible 6" X 1" diameter probe mounts on top of upper shaft or along arm rest rod depending on model) for easy access. YF-1 probe and cable weigh approx. 5 oz. YF-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - 10 oz total!
• While the YF-1 probe is waterproof, the switch box is water resistant and must not be submersed. (We use the same connectors as Garrett.)
• Installation requires no tools or modifications to the detector.
• The YF-1 incorporates all of the same functions as the stock coil including visual and audible target ID along with identical pinpoint functions (depending on model)! (On the GTP the YF-1 profiling function accuracy may be off and depth reading will be off due to the probe's diameter, which is normal.)
• High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a very flexible heavy duty custom 30" straight cable with strain relief for "tangle free" operation.
• Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
• "Mode" switch (see lower left photo) shuts off coil as it turns on probe and vise versa. Coil and probe are never on at the same time.
• New "Detector Selection Switch" (see lower right photo) allows you to switch between ACE series models and GTP/GTAX series models for proper Target ID and operation!
• YF-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggles from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
• No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
• No extra batteries required as the YF-1 utilizes the detectors power source.
• Complete installation & operation instructions included.

• FULL 12 MONTH WARRANTY!!

Free Ground Shipping

Sun Ray Invader YF-1 Probe for Garrett
Your Price: $179.95
Free Shipping (Continental US only)
 

• Fully compatible with all Fisher CZ models (except original CZ-6 & CZ-20)! The FZ-1 is precision built to ensure peak performance.

• Accurate "bullseye" pinpointing on coin size targets up to 3" + deep depending on detector used, settings, ground and moisture conditions!

• Light weight, waterproof/submersible 9" X 1" diameter probe mounts nicely along arm rest for easy access. FZ-1 probe and cable weigh approx. 6 oz. FZ-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - approx. 11 oz total!

• While the FZ-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as Fisher.)

• Installation requires no tools or modifications to the detector. Switch box and probe clips are attached by removable velcro lined clips.

• The FZ-1 incorporates all of the same functions as the stock coil including visual and audible target ID along with identical pinpoint functions! (Above features may vary from one CZ model to another and depth reading will be off due to the probe's diameter, which is normal.)

• High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a 30" cable with strain relief for "tangle free" operation.

• Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs) 

• Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.

• FZ-1 switch box is conveniently mounted  on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.

• No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!

• No extra batteries required as the FZ-1 utilizes the detectors power source. 

• FULL 12 MONTH WARRANTY!! 

Free Ground Shipping

Sun Ray Invader FZ-1 Probe for Fisher CZ Series
(Includes CZ-3D, CZ5, CZ70, Pro)
Your Price: $179.95
Free Shipping (Continental US only)
 

• Fully compatible with the Fisher ID Excel model only. The FE-1 is precision built to ensure peak performance.
• Accurate "bulls eye" pinpointing on coin size targets up to 3" + deep depending on settings, ground and moisture conditions!
• Light weight, waterproof/submersible 9" X 1" diameter probe mounts nicely along arm rest for easy access. FE-1 probe and cable weigh approx. 6 oz. FE-1 switch box, connectors, cable and two probe clips, etc. weigh approx. 5oz. - approx. 11 oz total!
• While the FE-1 probe is waterproof the switch box is water resistant and must not be submersed. (We use the same connectors as Fisher.)
• Installation requires no tools or modifications to the detector. Switch box and probe clips are attached by removable velcro lined clips.
• The FE-1 incorporates all of the same functions as the stock coil including visual and audible target ID along with identical pinpoint functions!
• High quality custom made, durable probe and connector cable used for precision performance. Probe incorporates a 30" straight cable with strain relief for "tangle free" operation.
• Quality high performance toggle switch used for peak performance! (Minimum 100,000 mechanical life operation-as described in manufacturer's specs)
• Toggle switch shuts off coil as it turns probe on and vise versa. Coil and probe are never on at the same time.
• FE-1 switch box is conveniently mounted on detector pole attachment in a neutral position (for both right and left hand users) and to prevent toggle from being accidentally switched or bumped by user or damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
• No external buzzers, vibrators or lights are needed as all target responses are heard clearly through your detector headphones!
• No extra batteries required as the FE-1 utilizes the detectors power source.
• Complete installation & operation instructions included.

  • FULL 12 MONTH WARRANTY!!

Free Ground Shipping

Sun Ray Invader FE-1 Probe for Fisher ID Excel
Your Price: $179.95
Free Shipping (Continental US only)